Description
Three way tee in 3/8-24 NF, sized for a differential pressure switch installation, with a 5/16 inch hole through the body so it can be bolted to the chassis instead of hanging on the lines.
That mounting hole is the part worth having. A tee carried only by its own tube runs feeds every hose shake and every bit of chassis flex straight back into the flares either side of it, and a flare that gets worked is a flare that eventually seeps.
3/8-24 NF is the common domestic inverted flare thread, so the outputs take standard tube nuts on a 45 degree seat. Check the seat angle as well as the thread before you mate anything to it, because 37 degree JIC hardware shares thread sizes with inverted flare hardware and will not seal against it.
