Description
Three way tee in M10 x 1, sized for a differential pressure switch installation, with a 7mm hole through the body for bolting it to the chassis rather than leaving it hanging on the lines.
M10 x 1 is the fine metric brake thread. It is not the 1.25 or the 1.5 pitch that share the same M10 major diameter, and all three exist on brake hardware. Any of them will start to thread into any other before it binds, so confirm the pitch on the parts you are joining before ordering. Thread adaptors for the M10 pitches are in the Thread Changers category if what you have and what you need do not match.
Bolting a tee down keeps hose shake and chassis flex out of the flares either side of it.
