BrakeQuip BQ2200 Bleeder Buster Bleed Screw Removal Complete Kit

$65.00

In stock

Description

Remove Frozen Bleeder Screws Like a Pro… Easily

Bleeder Buster

Part No.

Content Description

QTY

BQ2200-1

Bleeder Removal Tool

1

BQ2200W

Bleeder Filler Wire

1

BQ315

Bleeder Cap Small

10

BQ316

Bleeder Cap Large

10

BQ4433

Bleeder Screw 3/8-24 UNF

4

BQ4434

Bleeder Screw M10 x 1.0 Long

4

BQ4435

Bleeder Screw M10 x 1.0 Short

4

BQ4438

Bleeder Screw 5/16-24 UNF

4

BQ4439

Bleeder Screw 1/4-28 UNF

4

BQ4440

Bleeder Screw M10 x 1.5

4

BQ4441

Bleeder Screw M7 x 1

4

BQ4442

Bleeder Screw M8 x 1.25

4

BQ4443

Bleeder Screw M8 x 1

4

BQ4444

Bleeder Screw 7/16-24 UNS

4

BQ4445

Bleeder Screw 7/16-20 UNF

4

BQ4446

Bleeder Screw M10 x 1.25

4

Introducing the new Bleeder Buster Tool Kit

  • No more heating up

  • No more drilling and tapping

  • No more cursing

  • Can save you a lot of time

  • Will pay for itself quickly

  • Works on both cast iron and aluminum

It is as simple as:

 

  1. 1. Insert the largest diameter wire that will fit into the center hole of the bleed screw. Tap the wire plug in as far as it will go and cut off any wire remaining above the top of the bleed screw.

  2. 2. Place the adapter tool shaft into your air or electric hammer gun. Position the adapter tool on top of the bleed screw. Make sure the adapter tool shaft is directly in line with the bleed screw and that the adapter tool end are in full contact with the top of the bleed screw.

  3. 3. Maintain downward contact pressure and pull the trigger of the hammer gun for three to four seconds. This action will “compress” the bleed screw downward, while also “shocking” the threads free. The hex portion of the bleed screw will not be damaged and this action will not cause a problem.

  4. 4. Rotate the “compressed” bleed screw to remove it. It is suggested that if a hex wrench does not rotate the bleed screw and slips, that you use a pair of locking pliers for a more positive grip.

  5. 5. Install a new bleed screw of the correct size and thread into the component (with lubrication if necessary).

How does it work?

Installing the wire plug into the bleed screw prevents the walls of the bleed screw from collapsing when removing. Applying impact to the bleed screw for about three to four seconds will compress and work harden the bleeder screw and “shock” the threads free.

Note: The “compressed” bleed screw will need to be replaced after removal.

Additional information

Weight 6 lbs
Dimensions 1 × 0.2 × 0.2 in

Reviews

There are no reviews yet.

Be the first to review “BrakeQuip BQ2200 Bleeder Buster Bleed Screw Removal Complete Kit”

Your email address will not be published. Required fields are marked *